Shred V3 by Tek Division

This later batch production unit of the Shred V3 by Tek Division is an SBS (side-by-side) regulated mod that is configured to use either 18490/18500 batteries, or with the included extension tube, can also take 18650 batteries. The Shred V3 is also configured specifically for use with small diameter atomizers, accepting 18mm diameter atomizers if the upper cage is used, or up to 19.5mm diameter atomizers with the cage is removed.

The Shred V3 has a body made from 316 stainless steel, and has a Moddog Glitch 16 510 connector.

Power regulation duties are handled by an Evolv DNA GO board, with 5 different wattage settings programmed into it, and having a maximum power output of 40 Watts. Resistance compatibility range is 0.1 to 2.0 Ohms. Charging and Evolv Escribe connection is provided with an on-board mini USB port (cable not included).

Shred V3 Specifications:

• Height:
• 79.9mm (in 18650 mode)
• 65.4mm (in 18490/18500 mode)
• Width: 41.7mm
• Depth:
• 21.0mm (at battery tube)
• 19.5mm (at landing pad / body)
• 510 Depth From Top Of Battery Tube:
• 48.9mm (in 18650 mode)
• 34.4mm (in 18490/18500 mode)
• Maximum Atomizer Diameter:
• 18.0mm (with cage)
• 19.5mm (without cage)
• Weight (No battery nor atomizer):
• Body: 92g
• 18650 Extension Tube: 8g
• Atomizer Cage: 18g

Designed to perfectly fit with the FeV VS and SvoeMesto Kayfun Mini V3