Cover for Boreas Pro 510 Drip Tip by Taifun
This Cover (mid-section) is used in the >> Boreas Pro 510 drip tip by Taifun <<, and this product gives users options to have different colours/materials available for their Boreas Pro assembly. Be aware, this is only one part of the complete Boreas Pro assembly, and still requires the >> Taifun Boreas Pro Chopstick << as well as the >> Taifun Boreas / Pro 510 Base <<, which are NOT included in this product listing, to assemble a complete drip tip.
The Taifun Boreas Drip Tip series of drip tips allows for colour/material co-ordination with the new >> Taifun Box Pro S, M, and L <<.
Attention must be paid to the following: Atomizers that have a top coil/deck, or with dripper style atomizers that do not have a 510 drip tip stop, be aware that the Boreas drip tip can fall through due to its flangeless design. Pay close attention to this, as this drip tip can potentially cause a short circuit or electrocution if the tip tip were to fall deep enough into the deck to make contact with the coil and/or the coil posts. It is therefore NOT recommended to use the Boreas drip tip on the >> Taifun BTD RDA << or >> Taifun GX RDTA << series of atomizers.
The Juma variants (Woodland Green, Gem Black, and Gem Blue) are individually unique pieces and will visibly differ in grain, patterning, and colour shade from each other, and from the photos shown here. This is due to the inherent nature of the deviations in colour structure in Elforyn Juma, and do not constitute a defect. Each of the Juma drip tips are unique.
Care is recommended to be regularly performed on the Juma component, especially when putting them away for storage. To clean them, lukewarm water is sufficient, and then treat the Chopstick with some 100% vegetable glycerin to bring out and maintain a rich and coloured luster to it. NEVER use plastic cleaners or other oils on these plastic components that come into contact with your vapour inhalation path!
Boreas Pro Cover Material:
- Delrin (POM / Acetal), Juma, or PET
NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
