The "Origen Genesis v2 MkII Batch 3, 4mL" RTA by Norbert of Origen Mods

The Origen Genesis v2 MkII Batch 3, 4ml RTA by Norbert of Origen Mods is one of the most long lasting classic rebuildable tank atomizers in the vaping world, due to its impeccable machining quality, incredible flavour production, ease of use, size, and aesthetics!

Machined in small batches by Norbert in Hungary, the Origen Genesis (colloquially known as the "OriGenny"), is a Genesis-style atomizer with a single or dual coil build deck located on top of the liquid. Such a deck arrangement allows for dripper-like flavour performance due to the coils being much closer to the user's mouth. Additionally, the separation of the heating chamber above the liquid reservoir prevents spoiling (darkening) of liquid content.

Up to 4 ml of liquid is contained in the tank, and visible through the polycarbonate tank window. An optional stainless steel tank section (available as a separate purchase) can be used in place of the polycarbonate window if plastic tank cracking liquids are to be used.

Included hardware allows the user to arrange the deck for either single coil or dual coil usage. Use the appropriate chamber reducer when deciding to build for either dual or single coils.

A fill plug allows users to easily fill the tank.

Can be built with cotton wicks, mesh wicks, rope wicks, or any other number of wicking materials in a vertical orientation.

Multiple air flow control settings.

Specifications:

• Diameter: 22mm
• Height: 34.5mm
• Capacity: Approximately 4ml
• Air flow control settings: 1.2mm, 1.5mm, 2.0mm, or 2.5mm single OR dual coil options AND 2x1.2mm stacked for single coil use only.

Package Contents:

• Origen Genesis tank
• 1x Single coil deck (installed)
• 1x Dual coil deck
• 2x Fill hole screw/plug (1x installed)
• 4x Tank o-rings (2x installed)
• 4x Top cap o-rings (2x installed)
• 4x AFC o-rings (2x installed)
• 3x Negative contact screw (2x installed)
• 2x Positive grub screw for center post (1x installed)
• 1x Allen key

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Polycarbonate components are prone to cracking when exposed to aggressive liquids such as (but are not all inclusive of this list) cinnamon, banana, menthol, anise, licorice, and citrus based liquids. While this product is made from a high grade of polycarbonate, there is no guarantee it can resist cracking against such liquids, and Vapes by Enushi will not provide any type of warranty against damage from these types of liquids.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.