The DripStick Reborn by Ohman Stuff

The DripStick Reborn is the final production version of a prototype ultra compact mechanical tube mod that's been in the works for years by Ohman Bmods.

Made completely out of titanium, this ultra small mod houses a single 14500 battery cell for high resistance low wattage vaping, perfect for use with nicotine salts, oils, and waxes.

It's small size and ultra light weight titanium contruction allows this mod to be incredibly pocketable for stealth vaping.

Weight: 18 grams (without battery)

Diameter: 15.65 mm

Height: 60.95mm (mod only)

Height: 85.06mm (with included dripper and Ultem cap)

Bottom firing spring loaded switch.

A matching dripper deck is included, that connects to the tube via a hybrid connection for minimal voltage drop.

A simple two post deck results in easy builds.

Ultem cap included with a single air hole for a perfect mouth to lung draw with no heat transfer to the user's lips.

An included 510 adapter also allows users to attach their own atomizer to the mod via a standard 510 connection.

NOTE: Do NOT squeeze the Ultem cap too hard when removing from the deck, or you risk cracking the cap. All this stuff is thin and tiny. Handle with some care, please.

Being titanium, Scotchbrites and rubbing alcohol can be your finish friend.

Spare parts included to allow for positive pin height adjustment to accommodate different battery heights. All battery height adjustments are to be made at the atomizer pin.

The idea behind this is not to fiddle with a bunch of adjustments. With the right battery and atomizer, you should be golden. Or if changes need to be made, attach a shim or o-ring to adjust height. A different positive screw is also included to allow for different height of the included dripper deck.

AW14500 nipple top batteries are most recommended, but with a shim installed under the positive pin of the atomizer, flat top batteries should work okay as well.

The DripStick is designed to be built at 1.0 Ohm or higher, as your battery allows.

DISCLAIMER: Be very aware of the power limit of the 14500 cell that you choose to use in your device. 14500 cells are NOT capable of high current discharge loads. Only the absolute best cells can output a maximum of 9 Amps, with some cells only able to put out a maximum of 0.5 Ohms. Many of these 14500 cells express their current discharge rating. Be aware that the "C Rating" is NOT a measure of the continuous discharge rating. It is another variable that can be used to calculate the continuous discharge rating of the cell. If you do not know how to calculate this, ask someone who knows, or shoot us a message if you are unsure. It is better for you to be safe, than to be sorry.

DISCLAIMER: Mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.