The Aventador V2 by G.I. MODS Philippines

The Aventador V2 by GI MODS Philippines is an extremely hard hitting dual 18650 parallel battery unregulated mechanical box mod, featuring a Delrin side firing switch design, thick body walls for minimal voltage drop, silver plated copper contacts, and screw-in copper battery covers for reduced voltage drop and harder hits!

Delrin top plate and firing switch ensures minimal heat transfer to the user and to the body of the device.

510 center pin is a silver plated copper floating pin design, which automatically adjusts as you attach your atomizer.

NOTE: Attach your atomizer BEFORE inserting batteries. The pin height floats between the battery positive plate and the atomizer. Be sure to attach your atomizer and screw down to your desired height FIRST. Then, insert battery and tighten the battery cover. As the battery cover snugs up, it will cause the battery to push the positive plate up until it contacts the 510 pin and continue pushing up until the pin contacts the atomizer's 510 center. Once the battery door is tight, then it has made firm contact to the atomizer. The reverse steps of operation should be observed, to maintain durability of the silver plating on the 510 center pin, when removing the atomizer.

Initial Set Up:

1. Ensure batteries are removed.
2. Attach atomizer.
3. Insert batteries.
4. Screw battery covers until snug (do not over tighten).

Atomizer Removal:

1. Unscrew battery covers.
2. Remove batteries.
3. Unscrew atomizer.

An easy access service plate design is located on the side of the Aventador V2, which allows users to easily view and service the internal firing mechanism. When doing any maintenance work inside the trigger assembly, please ensure that all batteries are removed before doing so, or a short circuit can occur!

NOTE: The trigger firing bar can become loose over time through general usage. It is advised to open the trigger box from time to time to ensure this trigger firing bar is screwed tight to the Delrin switch.

WARNING: This device is an unregulated mechanical device that is recommended FOR ADVANCED USERS ONLY. Use at your own risk. Users of mechanical devices must be aware of battery safety and ohms law in order to prevent risk and harm to the device, to person or to property. Be aware, that mechanical mods such as this one do not have any short circuit protection and lack any firing button locks. Pay attention to the position of the firing button at all times when batteries are inserted, and always ensure that batteries are inserted with BOTH positive ends facing inward for parallel mechanical mods such as this.