Description

Creek RDA by Atmizoo of Atmizone

Atmizone introduces the Creek, their new 22mm RDA ideally for single-coil setups. Squonk-ready out of the box, the Creek also includes both MTL and DL oriented options in the package.

This "Matte SS" version features a machine-brushed stainless steel finish to match most mods.

Its design allows liquid bottom feeding, while at the same time driving air directly from underneath the coil for maximum flavour production.

Features:

Juice Well, Deck, and Vaporization Chamber

Creek's juice well is designed with a capacity of at least 1.2mL (depending on wicking used), offering great autonomy. The deck makes rebuilding very straightforward, with the design of its posts, auxiliary "rails" on top, and well-sized Phillips pan head post screws assisting in easy rebuilding. It can host various types of single coil setups, from small up to large exotic type coils. The inner formation of the Top Cap, together with the deck parts design, create an ideal vaporization chamber, which prevents condensation build up to reach up to the drip tip, along with a leak-proof design when vaping or carrying the device around. What's more: The Top Cap collaborates with the Base / deck via a smart one-way locking mechanism, which allows instant access to the deck but at the same time ensuring safety against unwanted cap removal (ie from children for TPD compliance).

The Airflow

With this BF RDA, Atmizone's airflow concept includes four parts collaborating in a simple but effective way, in order to regulate and drive air from the side of the Top Cap until it reaches right under the coil. Air is regulated via the small / large side slot of the Top Cap, then goes through slots of Base, Positive Post Insulator and path of Positive Post respectively, so that the air flow finally comes to the resistance from beneath. This helps to optimize vaporization and enhances flavour, while allowing the juice bottom feeding function to work flawlessly.

MTL or DL?

The Creek is actually suitable for both MTL and DL vaping. This is achieved by installing the Positive Post made for each vaping style, both coming right out of the box. Each Positive Post features a proper sized path of air flow inside. One DL oriented with cross section similar to a hole D≥4mm and one MTL oriented with cross section similar to a hole D≥2mm. Likewise, Creek’s Top Cap design incorporates one different side slot on each side, one large / DL oriented with cross section similar to a hole D≥4mm and one small / MTL oriented with cross section similar to a hole D≥2mm. Long story short: You choose the Pos Post you prefer and regulated it with the corresponding side slot of the Top Cap.

The Drip Tips

The product package brings you two different wide bore drip tip designs. They are both delrin to reduce heat but also serve as adapters for 510 drip tips. This way you may vape directly if you vape DL, or use your own favourite MTL drip tip on top if you vape MTL. Trying to take all details into account, collaboration between Top Cap and drip tips is normally tight in order to allow dripper function by removing the drip tip, but there is also an alternative o-ring which is included in the box for extra tight collaboration between drip tip and Top Cap.

Specifications:

Air flow tuning via two different (included) positive posts. One DL post for direct lung vaping, and one MTL post for mouth-to-lung vaping. Air flow fine adjustment with top cap small (MTL oriented) or large (DL oriented) side air flow slot.
Robust, lightweight 316 food grade stainless steel construction. PEEK thermoplastic polymer electrical insulators, and Acetal (Delrin/POM) 510 compatible drip tips.
M2.5mm Philips pan head nickel-plated SS screws to capture coil leads.
11.2mm post-to-post distance
7.0mm post-to-post net space
6.5mm net coiling space
Juice well capacity (empty): 1.2mL
Maximum net coiling height in the chamber: 5.5mm
Height (tip "A" installed): 27.0mm (top to bottom, 510 excluded)
Height (tip "B" installed): 29.0mm (top to bottom, 510 excluded)
Weight: 38g

Documentation:

>>Atmizoo Creek USER MANUAL [English]<<

Vapes by Enushi is a Canadian distributor for Atmizoo products by Atmizone. For wholesale inquiries, please send an email to sales@vapesbyenushi.com.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.