The Flave 22 Titanium Limited Edition by AllianceTech Vapor

The Flave 22mm Titanium by Alliancetech Vapor is a limited edition release of their popular Flave 24mm flavour atty.

Individually marked with serial numbers, the Flave 22mm Titanium is limited to only 1100 pieces worldwide, the Flave 22mm Titanium features titanium construction for faster heat dissipation and lighter weight, along with a smaller 22mm outer diameter yielding a smaller internal cap size for better flavour and vapour compression, creating the ultimate flavour atty!

Comes with a standard 510 center pin for standard dripping, as well as a bottom feed pin for bottom feeding.

The diameter of the screw is increased to 2.5mm, and the screw head is proportionally increased over the Flave 24, yielding a stronger and more durable screw.

The air flow is an oblong 2x4.5mm slot, oriented in the offset manner that the Flave is known for, allowing the air flow to strike the coil on each side to obtain optimum mixing of the vapourization. A specific slope is maintained, to guide the air flow to the lower part of the coil, and also prevents leaking due to over squonking.

For this limited edition release, titanium for the top cap and the drip tip was chosen as one of the finest materials for such an exclusive product. Its appearance, surface finish, light weight, and feel are the highlights of this material. Furthermore, the use of titanium limits the transmission of heat, allowing users to chain vape with minimal heat build up. Due to lower conductivity of titanium, the material for the conductivity poles is maintained in 316L stainless steel to preserve the conductivity of the Flave 24.

The standard 510 center pin and the bottom feed pin are both plated in gold and wrapped in PEEK insulators to provide a maximum seal and a protected 510 negative connection creates a safer connection point, even in hybrid assemblies.

AllianceTech Vapor, the French modder, is back with its newest RDA: The Flave 22 Titanium Limited Edition! This atomizer looks like its big brother, the Flave 24, but in a smaller 22mm diameter and made of titanium! This special assembly offers an amazing atomizer design and elegance.

The Flave 22 Ti LE is delivered with a drip tip made of Delrin and another one in Titanium.

Specifications

• Diameter: 22mm
• Material: Titanium, 316L SS, PEEK, gold, and Delrin
• Drip Tip Material: 1x titanium. 1x Delrin

Despite being smaller than it's larger Flave 24 brother, the Flave 22 Titanium works just like the Flave RDA. It accepts single coil builds, but in a smaller size due to the reduced deck size. This will result in better flavour production than its bigger brothers! Flavour chasers, rejoice!

Coils installation is still easy, thanks to the notches on each side of the deck. The deck's base has also been milled larger to hold more liquid.

Like the Flave 24, the Flave 22 is bottom feed capable. Both squonkers and drippers will be able to get the maximum flavour benefit out of this great little atomizer!

Air flow is still adjustable, but a little bit tighter than the Flave 24.

Package Includes

• Flave 22 Titanium Limited Edition Rebuildable Dripping Atomizer
• Gold plated solid 510 center pin for standard dripping
• Gold plated bottom feed 510 center pin
• Titanium drip tip
• Black Delrin drip tip
• Spare coil screws and o-rings.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.