Vicious Ant - Eris Hybrid Ti, Limited Edition Titanium - DNA75C AIO Mod
Brand : DISCONTINUED
DISCONTINUED
Titanium Eris Hybrid Mod, by Vicious Ant
The Eris Hybrid Mod by Vicious Ant is a unique fully integrated rebuildable tank atomizer and regulated mod all-in-one, controlled by an Evolv DNA75C chip set and powered by a single 18650 cell.
This Limited Edition Titanium version features a titanium components for the chipset housing, atomizer deck, and bottom frame plate, along with a polished PMMA battery housing to match the tank for light weight and robust durability while keeping the look super classy.
Integrated build deck features an easy-to-build 2-post build deck for single coil builds, with an easy-wicking design.
Air flow is controlled via Ultem inserts. Use different inserts to get different air flow settings. Two are included with the following air flow configurations:
- Two air holes with 1mm diameter each
- Four air holes with 1mm diameter each
Optional Ultem air flow inserts have the following sizes:
- One air hole with 1mm diameter
- Four air holes with 1.5mm diameter each
Note: Do NOT dry fire your goal with the Ultem inserts attached, or you may melt the Ultem!
When FILLING the Eris Hybrid, ensure you have the tank UNLOCKED on the mod (rotated counter-clockwise till it stops), in order to close the liquid flow ports BEFORE you open the drip tip to access the liquid fill ports. Once tank is filled with liquid, Screw the drip tip back on BEFORE rotating the tank clockwise till it locks in to proper position on the mod.
WARNING: The included battery cap / drip tip removal key is ONLY for removal of said parts if they get stuck from over-tightening! DO NOT use this key to tighten these parts on to your device, as over-tightening the drip tip or battery cap to the device can cause damage to the threads and/or the device! Such damage is NOT covered by Vicious Ant warranty! The additional torque that this key provides, exceeds the amount of torque required to attach either of these parts. These parts do NOT need to be excessively tightened! Again, this key is ONLY for loosening these parts!
Battery: See our selection of >>high current discharge 18650 IMR lithium cells<< to mate properly with the Eris Hybrid.
SPECIFICATIONS:
- Height: 110mm
- Width: 34mm
- Depth: 25mm
- Battery: Single 18650 high discharge IMR lithium cell
- Power control: Evolv DNA 75c
- Button and switch material: Stainless steel
- Battery housing material: PMMA
- Chipset housing material: Titanium
- Deck and bottom frame plate material: Titanium
- Battery cap material: Stainless steel
- Tank material: PMMA
- Drip tip material: PMMA
- Capacity: 6mL
- Chamber reducer material: Ultem (PEI)
- Airflow Insert material: Ultem (PEI)
- Ultem Airflow Insert (Included): 2x1mm
- Ultem Airflow Insert (Included): 4x1mm
- Ultem Airflow Insert (Optional Purchase): 1x1mm
- Ultem Airflow Insert (Optional Purchase): 4x1.5mm
- Silver plated contact
- Laser engraved unique serial number
- Laser engraved Vicious Ant logo
Package Includes:
- 1x Eris Hybrid Ti Mod
- 1x PMMA Tank
- 1x PMMA drip tip
- 2x Ultem Insert (2x1mm & 4x1mm)
- 1x Key/tool for Drip Tip and Battery Cap Removal
- 3x Spare O-rings
- 2x Screws
DISCLAIMER: Acrylic components are prone to cracking when exposed to aggressive liquids such as (but are not all inclusive of this list) cinnamon, banana, menthol, anise, licorice, and citrus based liquids. While this product is made from a high grade of PMMA, there is no guarantee it can resist cracking against such liquids, and Vapes by Enushi will not provide any type of warranty against damage from these types of liquids.
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.