Legacy by Tek Division

The Legacy by Tek Division represents past experience with a combination of new 3D printed material elements.

The body is made from a corrosion-resistant alloy monoblock of raw anticorodal 6082 aluminum and does not require anodization. Be aware, that due to the material selection, it does have a unique raw-looking finish with it that may pick up a subtle patina on it over time, which can be refreshed with a bit of vinegar.

The combination with 3D printed PA12 material gives the product a very light weight to it.

Powered by a single 18650 battery that is protected by a 3D printed cover.

An Evolv DNA60 chipset represents the brains in the device, in combination with a high-performance OMRON proximity switch with fast latency (rated at 50 million switch cycles), giving users a feeling of something unexperienced before.

The USB Escribe connection is provided with an external PCP interconnection bridge that is plugged into the pin access inside the battery tray. Otherwise, there is NO USB port for direct data connectivity. DO NOT LOSE THIS PCP INTERCONNECTION BRIDGE!

New designed 510 connectors from STEELABS will permit you to adjust atomizer airflow direction by rotating the top plate of the connector.

Dimensions:

• Height: 80.0mm
• Width: 48.6mm
• Depth: 24.0mm
• Drop from top to 510 landing pad: 38.4mm
• Weight: 97g (with no battery nor atomizer)