Taifun GT III (2021) RTA

The Taifun GT III (GT3) by Taifun is a Rebuildable Tank Atomizer with a incredible flavour production, glass tank, stainless steel shield for the glass, adjustable air flow (for MTL to restricted DL usage), adjustable juice flow, and 5mL liquid capacity.

This 2021 release is a limited and final production run of the infamous Taifun GT III, as a thank you to all of the fans who have inquired about another production run of the Taifun GT III again. For the love, we've decided to get this made one more time, just for you guys!

This 2021 version of the Taifun GT III is identical to the original version from 2016, with a slight change to the insulator. As such, there is a separate >> Taifun GT III 2021 Service Set << available for this version, as the old service set is not completely compatible with this version. The o-rings and screws are all the same, so if you have an old sets, they will still work for the screws and o-rings. Only the insulator is the non-compatible version. Also note, the Service Set is different from the O-Ring Set. Purchase the repair set as required.

As with all Taifun products, the Taifun GT3 features fantastic flavour production in a quality German-machined atomizer design using stainless steel and glass components for pure flavour and no adulteration of flavour.

Air flow is easily adjusted via the AFC ring that allows users to close down the air flow for mouth-to-lung (MTL) usage, or can open completely for a restricted direct-lung (DL) draw.

Air flow can be further reduced at the coil for increased velocity using the >> PEEK 2mm MTL Airflow Insert <<.

Adjustable 510 center screw height allows fitment with all mods.

Full disassembly of the entire base for servicing and cleaning is now a possibility with the GT III.

Juice flow is adjustable by turning the drip tip, which rotates the entire chimney and evaporation chamber. Included proprietary drip tip design allows for a direct keyed interface between the drip tip and the chimney to allow adjustment. However, you may use your own standard 510 drip tip if you >>purchase the 510 drip tip adapter for liquid control HERE<<, if you wish to maintain liquid flow control.

Usage Note: Close off the juice flow by turning your drip tip to block the juice inlets, before filling liquid. After top cap is replaced, then you can open your juice flow back up.

Taifun GT III (2021) RTA Specifications:

• Diameter: 23.65mm at the widest point (knurled sections), 23.00mm at the base.
• Height: 53mm (without drip tip)
• Materials: Food grade stainless steel (1.4301) and PEEK
• Air flow: Classic, single hole from below, adjustable via exterior control ring
• Restricted DL air flow
• Classic wiring mounts (connect under screw heads)
• Liquid control adjustable via drip tip
• Top fill design
• Interchangeable tank options

WARNING: The Taifun GT III is NOT designed for use on pure mechanical hybrid mods!

Included:

• Taifun GT3 2021 rebuildable tank atomizer
• Supplement with replacement o-rings
• Quick start guide
• Warning guide

Extra Parts:

• See our entire catalog of >> Taifun GT III products and accessories <<.

NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.