Taifun BTD RDA by Taifun

The Taifun BTD RDA is a bottom feed capable rebuildable dripping atomizer that has a number of innovative design features that not only provides fantastic flavour and vapour output, but also keeps the stainless steel cap set very cool and minimizes leaking out of the air holes when over dripping or over squonking.

The Taifun BTD is a bottom-feed ready RDA that can be used as a standard dripper or as a BF atomizer, depending on which of the included pins you use.

Featuring 4x downward angled air flow intake holes, the Taifun BTD can be used as either a MTL RDA or a wide open unrestricted lung hit atomizer.

Featuring a unique liquid flow channel to reduce chances of liquid creeping up to the air holes, plus the downward angled air holes results in a fairly leak resistant RDA design that is difficult to over squonk and over drip.

The interior of the cap is fitted with an Ultem lining to reflect heat away from the cap, resulting in a very cool experience, despite being a stainless steel cap. Chain vaping does not cause this cap to become excessively hot, and minimal heat is transferred to the user's lips.

An ultra side bore friction fit ergonomic drip tip is included with the Taifun BTD, which allows for great air flow as well as allows for easy dripping direct into the drip tip.

Internal locators in the cap allows the cap to stop at two points on the deck, making it easier to remove the deck from your atomizer, even if you over tighten it. Turned completely one way, the air holes completely close, allowing for leak-free transport. Turning it completely the other way allows for only one air hole to be open on each side, providing a restricted direct lung hit.

The deck features a total of four coil leg trap points along its two poles, allowing for easy coil builds, and the ability to install single or dual coil builds. Users can get creative in builds using either horizontal or dual coil builds.

Includes a 25>22mm stainless steel beauty ring.

All of these great features combined with the fantastic German engineering that Taifun is known for, results in an incredible RDA.

Taifun BTD Features:

Diameter: 22mm
Height: 18mm (without drip tip)
Food grade materails (stainless steel 1.4301, Ultem, PEEK)
Ultem heat insulator built into the cap provides more safety against electrical short circuits while also reducing heat transfer to the cap
Adjustable AFC via 4 holes of 2mm diameter each
Widebore drip tip (friction fit without o-rings)
Bottom feeder pin (squonk pin) made of stainless steel
Solid 510 positive pin also included for standard dripping
Stainless steel beauty ring 25mm included

ATTENTION: The positive terminal of the Taifun BTD has a length of approximately 4.2mm. We ask you to make sure that the BTD is only used on battery carriers with spring-loaded or adjustable positive poles, as there is a risk that it will otherwise not get in contact and cannot be used.

Package Contents:

1x Taifun BTD RDA
1x Stainless steel 25mm outer diameter beauty ring
Spare parts bag
User manual

Taifun BTD Manual

<< Taifun BTD Manual Download Link >>

Note: The Taifun BTD comes pre-lubricated with a thin layer of VG on the o-rings. This is NOT machining oil. You may build and vape directly off this if you wish. The VG is applied during assembly to prevent tearing or cutting the o-rings when dry.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

Taifun BTD RDA

https://shop.smokerstore.de/verdampfer/taifun/968/taifun-btd-r...

5
Incredible

Posted by Dave on 2021 Mar 4th

If you know smokerstore then you know quality machining is everything. Enushi delivers that too. NOW the rda, deep well, perfect airflow, ultem top insert cools the cap by mouthpiece and it fits LARGE coils w legs in any direction. 10/10 will be purchading another but with caps!!
5
It's great

Posted by Voidths on 2021 Feb 15th

Build quality is fantastic. Looks are simple yet elegant. Yes, the 510 pin is short, but it works fine on a Stratum 303. I made a 3mm alien and lowered the coil as low as I could get it and the flavor is amazing. Airflow is smooth and pretty quiet, no whistles. I love this thing!
4
Great RDA

Posted by Jorge on 2019 May 22nd

Great flavor, high quality machining, looks great. The only reason why I gave it 4 stars and not 5 is the positive pin, which is too short and will not work with many mods. My vicious ant spade had to be modified in order to use this RDA with it.
4
taifun btd

Posted by Channing Mcnair on 2019 May 12th

This rda is made of high quality materials and is machined great it has a little restriction to the airflow it has options for placing your coils different and gives good flavor it was worth the money
5
Excells with Large coils!

Posted by Brett Allard on 2019 Apr 22nd

Long Story short it does NOT disappoint!

The trick to fully utilizing the build deck is to use something that's 3.5 or 4mm ID dropped as far low as those coils can get the bigger the better! Ultem insert in the top cap does a gold job at expelling heat.

My only issue is with the actual pin including the squonk pin.
It sits almost dangerously flush to the threading making it a no go with beauty rings on the majority of mods that don't have a raised 510.
5
Sick little 22mm dripper with wicked room

Posted by Unknown on 2019 Feb 4th

I once put a 5mm id coil in this deck. I love this little thing, airflow is incredible
5
Always Perfect

Posted by Unknown on 2019 Jan 31st

Like always, the design, engineering and machining are flawless, I wouldnt expect anything less from SmokerStore and of course the flavor is amazing. I just need the Black and Ultem caps that go with it :D