The Kayfun Prime Special Edition by SvoëMesto

The SvoëMesto Kayfun Prime is a rebuildable tank atomizer specifically designed for mouth-to-lung vaping and that style's characteristic tighter air flow for a more cigarette-like experience. Six adjustable air flow levels allow users to select from a very tight draw, to a loose cigarette-style draw.

The Kayfun Prime is a pure "mouth to lung" atomizer. It inherits the functionality and design language of the Kayfun 5, but the inner life has been completely redesigned and tuned specifically for MTL vaping.

Finish of the Special Edition:

Note: Processed and coated surfaces are sensitive to scratches and therefore NOT covered by the warranty. Handle with care.

Note: The blasted versions can have different brightness levels depending on the light direction. As such, the brightness of the product may differ from the product images shown here.

• High Noon (brushed and gold coated)
• Midnight (sand and glass bead blasted)
• Moonlight (glass bead blasted)
• NITE DLC (coated with DLC, deck and bottom plate gold coated)
• Starlight (glass bead blasted and gold coated)
• Sunrise (partially glass bead blasted and gold coated)
• Twilight (partially glass bead blasted and gold coated)

The Special Edition versions come in different finishes, and the logo on the steel tank can vary between the Prime and SM logos.

The newest "Nite DLC" version of the PRIME Special Edition series features a Diamond-Like Carbon (DLC) coating, an extremely hard and scratch resistance coating process that makes the surface of the Prime even harder than uncoated. 100% food grade, scratch resistant, biocompatible, and non-toxic, the Nite DLC PRIME is for the ultimate MTL user looking for a subdued and highly resilient finish. Additionally, the deck and bottom plate are gold plated to increase conductivity while minimizing oxidation and giving it a striking contrast against the black DLC coating of the exterior.

The Kayfun series is known to produce some of the most exceptional and accurate flavour reproduction on the market, and the Kayfun Prime does not disappoint in this regard. Users will be greeted with true flavour in this easy to rebuild and wick atomizer.

The Kayfun Prime follows a similar design pattern as his little brother, the Kayfun Mini V3. A fully adjustable liquid control gives you full control over your liquid flow by turning the tank clockwise to close it down, or counter-clockwise to open it up. However, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun Prime can be filled through the top. You can access your coil by removing the tank, regardless if it’s filled or not. The build deck features Kayfun's classic two post build deck style, which will easily hold a coil for this style of low wattage vaping.

Filling the tank is also made easy. Just close off the juice flow completely by turning the tank clockwise, then unscrew the top cap, fill your liquid, re-attach the top cap, then open the juice flow control back up by turning the tank counter-clockwise.

A redesigned evaporation chamber makes it smaller than the Kayfun 5's, which yields greater flavour production on mouth to lung vaping.

The Kayfun Prime is made from the same high class materials as all of the other Kayfun tanks.

The surface has a brushed stainless steel finish, and includes both a full stainless steel tank as well as a borosilicate (Pyrex) glass tank.

AIR FLOW CONTROL

The Kayfun Prime offers air flow control that is externally adjustable in 6 increments from 1mm to 2mm airflow.

LIQUID CONTROL AND FILLING

The Kayfun Prime gives you the option to restrict or close off the liquid flow completely, by turning the tank clockwise. At the fully closed position, you can open the top cap to conveniently fill the tank from the top through the large fill port. An air pocket in the top cap prevents spillage if the tank is filled beyond the maximum, and ensures an optimal liquid flow. Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil.

BUILD DECK AND EVAPORATION CHAMBER

The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eliminate temperature spikes and therefore creates a better flavour profile.

Along with the build deck, the evaporation chamber has shrunk as well, to condense the vapour and give you a rich and flavourful experience, even at lower wattages.

The Kayfun Prime comes with two types of coil screws: Phillips head screw and slot head screw. These are not preinstalled, and the favoured type can be selected from the supplied replacement kit.

MEASUREMENTS

• Height: 45.5mm (excluding drip tip and connector)
• Diameter: 22mm
• Tank Capacity: 2mL (4.5mL Extension Tank can be purchased separately)
• Air flow sizes: 1mm, 1.2mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm

MATERIALS

• Stainless steel components: WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A)
• Glass tank sleeve: Borosilicate glass
• Insulators: PEEK, POM-C
• O-rings: NBR 70

TECHNICAL FEATURES

• Anti heat drip tip with black POM (Delrin) inlay (engraved)
• Top filling
• Borosilicate glass
• Liquid control (fully adjustable)
• PEEK insulator
• External airflow control
• 316L stainless steel
• 510 connector
• Serial number for authentication
• Easy assembly and maintenance

INCLUDED

• 1x Kayfun Prime Special edition with glass tank installed
• 1x Special Edition steel tank
• 1x Spare parts kit
• 1x Manual

Digital Manual can be downloaded >>HERE<<.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.