Dani SBS 18350 Qi by dicodes

The SBS18350Qi by dicodes is an ultra-compact Side-By-Side mod with built-in Qi wireless charging. Positioning the atomizer (up to 24mm diameter) beside the battery tube of the unit allows for a very stout and compact setup.

Wireless Qi charger base is included, or you can use your own as well.

Single-button control with Extreme V3 chip set allows users to easily navigate the very in-depth menu options allowing for full user control over multiple preferences.

24mm diameter 510 landing pad can fit up to 24mm diameter atomizers flush.

Comes with 18350 battery tube, but optional 18490/18500 and 18650 tubes can be purchased separately >>HERE<<.

With the included 18350 battery tube, the approximate drop from the top of the battery tube to the 510 landing pad is 20.30mm (measured with KeepPower 1200mAh Flat Top cell - your measurements may vary slightly depending on the battery used).

With taller battery tubes, the drop to 510 connector will increase accordingly, however, users can compensate for this with the optionally purchased SBS 2415 - 510 Extension, which is a 24mm tube that extends the height of the 510 landing pad by 15mm.

The chipset used is a 60 Watt temperature controlled unit that can be used with multiple wire types which have a temperature coefficient. The menu offers four different operating modes, allowing the user to switch between variable wattage, variable wattage with heat protection (10 options), variable wattage with power boost (10 options), bypass mode (power limited by output current <20A), or the (very) accurate variable temperature mode (when using a temp-control wire type.)

For temperature control, dicodes mods are ideally used with the >> dicodes ResisTherm (NiFe30) wire <<. A small sample length of this wire is included with each purchase, but more can be purchased separately >>HERE<<.

The body is made mostly of stainless steel, giving a sturdy and solid feel in your hand, with a brushed finish to match most atomizers. Bottom plate is made of a black plastic to allow wireless charging to transmit through.

The Dani SBS18350Qi is precision machined in Germany and backed by a two year warranty on the electronics*.

dicodes.  There is no substitute, why settle for anything less!

dicodes Dani SBS18350Qi Features

• Innovative ultra-compact design
• Full stainless steel construction, besides a black plastic bottom plate to allow wireless charging to transmit through
• 60 watts of power
• For atomizers up to 24mm diameter
• Resistance range: 0.05 – 5 ohm
• 0.5" compact OLED display
• Powered by a single >>18350 cell<< (not included)
• Built-in Qi wireless charging
• Wireless charger base is included in delivery
• Height (to top of battery tube): 45mm
• Height (to 510 landing pad): 24.3mm
• Width: 49mm
• Depth: 24mm
• Weight: 99 grams
• Spring-loaded center pin
• 510 pin material: CuBe, Copper Beryllium (harder than steel) 
• Temperature controlled vaping mode with programs for various wire-types
• Optimized for dicodes resistance wire RESISTHERM (Sample included). Purchase >>HERE<<.
• Reverse battery protection
• Versatile menu structure
• Individual user preferences selection
• 2 Year Warranty
• Made in Germany

Specifications for Dani SBS18350Qi Wireless Charger (included)

• Charger for SBS18350Qi only
• USB-C to USB-C (cable included in delivery)
• Blue LED: charging
• Red LED: not charging
• Made in Germany

Note: Images shown with atomizers and different battery tubes are for demonstration purposes only, and are not included in this sale. This sales listing is only for the mod with standard 18350 battery tube.

Contents

• dicodes Dani SBS18350Qi
• Short user guide
• Sample pack of dicodes NiFe30 ResisTherm Temperature Control Wire
• Packaged in custom metal box

Instruction Manual Download

• Download the dicodes SBS18350Qi Instruction Manual

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. Warranty will also not cover neglect caused by the user, such as setting the device down on liquid (which may short out the circuit against the charging contacts at the bottom), or liquid leaking out of the user's atomizer which may seep into the body and contact the electronics/plate. Liquid seeping in to dicodes mods have been known to cause a short circuit. Take care to NOT place this mod on to a wet surface, or if you encounter a liquid leak, to ensure the bottom plate is removed to clean up any accumulated liquid from the bottom and ensuring it is dry before re-inserting a battery. Any damages as a result of such neglect can be repaired, however, will be at the user's cost for shipment and repair.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.