Dani SBS 18650 by dicodes

The Dani SBS 18650 by dicodes is a Side-By-Side mod that positions the atomizer beside the battery tube of the unit, providing for a compact setup, particularly with very large tanks.

Three-button control allows users to easily navigate the very in-depth menu options allowing for full user control over multiple preferences.

Up/down adjustment buttons located on the side of the top plate, and users can also change the function of this rocker button to be an alternative firing button, allowing users to adjust for different firing positions.

25mm wide 510 landing pad ring can be removed and replaced with optionally purchased different sized >> dicodes Dani SBS Reduction Cones << for a flush fit with different sized atomizers.

If you already own an older release of the >>dicodes CS1 Battery Charging Station<< that did not come with the Dani SBS mod inlay, you can purchase the proper >>dicodes Dani SBS Adapter Inlay for dicodes CS1 Charging Station here<<.

The Dani SBS by dicodes is an 80 Watt temperature controlled mod that is as compact and ergonomically designed as you can get, and can be used with multiple wire types which have a temperature coefficient. The menu offers four different operating modes, allowing the user to switch between variable wattage, variable wattage with heat protection (10 options), variable wattage with power boost (10 options), bypass mode (power limited by output current <20A), or the (very) accurate variable temperature mode (when using a temp-control wire type.)

The body is made from anodized aluminum, available in six different colors with a brushed stainless steel top & bottom cap. It features a top mounted OLED display and a three button operation to easily scroll through the menu with one hand for selecting the desired program. For a mod packed with so many features, it is an easy menu to navigate.

The Dani SBS 18650 is precision machined in Germany and backed by a two year warranty on the electronics*.

dicodes.  There is no substitute, why settle for anything less!

Features

• 80 watts of power
• For atomizers up to 25mm outer diameter
• Reduction cones (24mm, 23mm, and 22mm) available separately
• Resistance range: 0.05 – 5 ohm
• OLED display
• Powered by a single 18650 cell (not included)
• Recommended batteries: >> 18650 Batteries <<
• Height: 78mm
• Weight: 146 grams
• 510 connection point with a 25mm wide landing pad
• Spring-loaded center pin
• 510 pin material: CuBe, Copper Beryllium (harder than steel) 
• Top and bottom cap material: Brushed stainless steel
• Temperature controlled vaping mode with programs for various wire-types
• Optimized for dicodes resistance wire RESISTHERM (Sample included). Purchase >>HERE<<.
• Reverse battery protection
• Versatile and easy to navigate menu structure
• Individual user preferences selection
• Available colours: Black, or Titan
• 2 Year Warranty
• Made in Germany

Note: Images shown with atomizers and different sized reduction cones are for demonstration purposes only, and are not included in this sale. This sales listing is only for the mod with the standard 25mm 510 landing pad/cone.

Contents

• dicodes Dani SBS 18650
• Short user guide
• Sample pack of dicodes NiFe30 ResisTherm Temperature Control Wire
• Packaged in custom metal box

Instruction Manual Download

• Download the dicodes Dani SBS 18650 Instruction Manual

Charging

The Dani SBS 18650 does NOT have a built-in charger, and will require the user to manually pull out and replace batteries as they are spent. However, the CS1 Charging Station by dicodes comes with the necessary adapter to charge the Dani SBS in the base. The CS1 Charging Station by dicodes is a desktop charger designed specifically for the Dani Box series of mods, that can be purchased separately >>HERE<<. This charging station allows users to just drop their Dani SBS into the charging station for fast, easy, and convenient charging.

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. Warranty will also not cover neglect caused by the user, such as setting the device down on liquid (which may short out the circuit against the charging contacts at the bottom), or liquid leaking out of the user's atomizer which may seep into the body and contact the electronics/plate. Liquid seeping in to dicodes mods have been known to cause a short circuit. Take care to NOT place this mod on to a wet surface, or if you encounter a liquid leak, to ensure the bottom plate is removed to clean up any accumulated liquid from the bottom and ensuring it is dry before re-inserting a battery. Any damages as a result of such neglect can be repaired, however, will be at the user's cost for shipment and repair.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.