Description

Dani SBS 21700 by dicodes

The Dani SBS 21700 by dicodes is a Side-By-Side mod that positions the atomizer beside the battery tube of the unit, providing for a compact setup, particularly with very large tanks.

This new Dani SBS 21700 variant keeps almost all of the same dimensions as the original >> Dani SBS 18650 <<, but with a minimal 6mm height increase and a 3mm width increase to accommodate the larger 21700 cell.

Also, a USB-C charge port is now built-in to allow you to charge while on-the-go!

Three-button control allows users to easily navigate the very in-depth menu options allowing for full user control over multiple preferences.

Up/down adjustment buttons located on the side of the top plate, and users can also change the function of this rocker button to be an alternative firing button, allowing users to adjust for different firing positions.

25mm wide 510 landing pad ring can be removed and replaced with optionally purchased different sized >> dicodes Dani SBS Reduction Cones << for a flush fit with different sized atomizers.

The Dani SBS by dicodes is an 80 Watt temperature controlled mod that is as compact and ergonomically designed as you can get, and can be used with multiple wire types which have a temperature coefficient. The menu offers four different operating modes, allowing the user to switch between variable wattage, variable wattage with heat protection (10 options), variable wattage with power boost (10 options), bypass mode (power limited by output current <20A), or the (very) accurate variable temperature mode (when using a temp-control wire type.)

The body is made from anodized aluminum, available in six different colors with a brushed stainless steel top & bottom cap. It features a top mounted OLED display and a three button operation to easily scroll through the menu with one hand for selecting the desired program. For a mod packed with so many features, it is an easy menu to navigate.

The Dani SBS is precision machined in Germany and backed by a two year warranty on the electronics*.

dicodes. There is no substitute, why settle for anything less!

Features

80 watts of power
For atomizers up to 25mm outer diameter
Reduction cones (24mm, 23mm, and 22mm) available separately
Resistance range: 0.05 – 5 ohm
OLED display
Powered by a single >> 21700 cell<< (not included)
Built-in USB-C charging port
Height: 84mm
Weight: 160 grams
510 connection point with a 25mm wide landing pad
Spring-loaded center pin
510 pin material: CuBe, Copper Beryllium (harder than steel)
Top and bottom cap material: Brushed stainless steel
Temperature controlled vaping mode with programs for various wire-types
Optimized for dicodes resistance wire RESISTHERM (Sample included). Purchase >>HERE<<.
Reverse battery protection
Versatile and easy to navigate menu structure
Individual user preferences selection
2 Year Warranty
Made in Germany

Note: Images shown with atomizers and different sized reduction cones are for demonstration purposes only, and are not included in this sale. This sales listing is only for the mod with the standard 25mm 510 landing pad/cone.

dicodes Dani SBS 21700
Short user guide
Sample pack of dicodes NiFe30 ResisTherm Temperature Control Wire
Packaged in custom metal box

Instruction Manual Download

Download the dicodes Dani SBS 21700 Instruction Manual

Charging

While the Dani SBS 21700 has a built-in USB-C charging port, users can also opt to manually swap pre-charged batteries as they are spent.

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. Warranty will also not cover neglect caused by the user, such as setting the device down on liquid (which may short out the circuit against the charging contacts at the bottom), or liquid leaking out of the user's atomizer which may seep into the body and contact the electronics/plate. Liquid seeping in to dicodes mods have been known to cause a short circuit. Take care to NOT place this mod on to a wet surface, or if you encounter a liquid leak, to ensure the bottom plate is removed to clean up any accumulated liquid from the bottom and ensuring it is dry before re-inserting a battery. Any damages as a result of such neglect can be repaired, however, will be at the user's cost for shipment and repair.

Please Note: In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.