Dani Extreme V3 - 22mm Titanium by dicodes

High tech German engineering at its finest, the dicodes Dani Extreme V3 Titanium is a temperature controlled regulated mod, featuring a spring loaded 510 connection for a flush atomizer fit when mounted. Constructed completely out of titanium for an extremely high strength to weight ratio - for the same strength as stainless steel, it is half the weight!

Note: Images shown with atomizer attached are for demonstration purposes only. The tank is not included in sale. This sales listing is only for the Dani Extreme V3 Titanium mod.

The Dani Extreme V3 is a powerful, compact 22mm tube mod with clean lines and sexy looks that delivers a high quality, smooth, flavorful vape experience. It offers 5 different modes, allowing the user to switch between variable wattage, variable wattage with heat protection, variable wattage with power boost, variable temperature (various wire types supported), and a bypass mode which turns the device into an unregulated protected Mod.

This single button device is packed with so many features and adjustments, that the initial learning curve can be a bit daunting due to the level of complexity and number of adjustments available. Once you’re beyond the learning curve, the navigation and settings become second nature.  *Please take some time to read and understand the short instruction manual packaged with the device. We also recommend you download the complete manual for more detailed instructions and features explanation. (See the PDF attachment below for the full manual.)

Can be configured to accept 18350, 18490, 18500, and 18650 batteries. Buy the smallest length version for the smallest battery you will use. Purchase the >> dicodes Dani Extreme Extension Cap << to provide flexibility in fitting larger cells as needed.

If using in an 18350 configuration, the most highly recommended battery, is the >> KeepPower 18350 << cell, with its 1200mAh capacity and a 10A continuous discharge rating.

If using in an 18490/18500 configuration, the most highly recommended battery, is the >> KeepPower 18500 << cell, with its 1100mAh capacity and a 10A continuous discharge rating.

If using in an 18650 configuration, the most highly recommended battery, is the >> AW 18650 << cell, with its 3000mAh capacity and a 20A continuous discharge rating.

The Dicodes Dani Extreme V3 is precision machined in Germany and backed by a two year warranty on the electronics

Dicodes, there is no substitute! Why settle for anything less!

Features

• Titanium alloy body with custom tactile button and laser engraved logo
• 5-60 watts of power output
• 0.05 to 5 Ohm acceptable load range
• 22mm diameter
• Spring loaded 510 connection
• OLED display with adjustable brightness settings
• Scrolling single button menu
• Accepts a single 18350, 18490, 18500, or 18650 battery cell only. Do NOT stack cells! Use high discharge rated cells only.
• Temperature controlled vaping mode with various wire-types
• Power boost modes
• Heat protection modes
• Bypass mode (protected by unregulated)
• Optimized for >> dicodes RESISTHERM NiFe30 Temperature Control Resistance Wire <<
• Short circuit protection
• Reverse battery protection
• Adjustable battery cut off (2.5v-3v)
• Predefined temperature control wire type settings (Dicodes NiFe30 "ResisTherm", Titanium, Ni200, Tungsten, or customize your own)
• Versatile menu structure
• Individual user preferences selection
• 2 years warranty
• Made in Germany

Contents

• Dicodes Dani Extreme V3 mod in the chosen length
• Short user guide
• Sample pack of Dicodes NiFe wire
• Packaged in custom metal box 

Dimensions (approx)

• Diameter: 22 mm
• Length:
• 75.6mm (18350)
• 105.5 mm (18650)
• Weight:
• 63 grams (18350)
• 79 grams (18650)

Detailed Instruction Manual

• Dani_Extreme_V3_manual.pdf (672.1 KiB)
• Support, discussion and tips:  Dicodes Facebook group.

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.