BORO by dicodes

The dicodes BORO mod is the first mod made by dicodes for the BORO AIO platform, to utilize the industry-standard >> BORO TANKS << as defined by Billet Box Vapor, and designed around by many aftermarket makers.

Featuring a full aluminum and steel construction, made 100% in Germany!

Accepts a single 18650 battery, with power regulation duties handled by a dicodes 60W chipset.

Built-in USB-C charge port allows for fast and convenient charging.

TWO fire button locations that are user-selectable for use! Either use the side-button, or the button on the face, whichever is more comfortable for you!

dicodes BORO Mod Details:

• Suitable for standard Boro tanks and RTA's
• 18650 battery
• USB-C charging port with LED indicator
• Height: 76.3mm
• Width: 51.3mm
• Depth: 23.2mm
• Weight: 150g (without battery, tank, nor RBA)
• Spring-loaded contact pin
• Made in Germany
• 1 year warranty, covering the proper functioning of the hardware and software. Damage caused by drops, liquid, and improper handling is not covered by warranty. Attempting to open the device will void the warranty.

Chipset Details:

• Maximum Power Output: 60 Watts
• Resistance Range: 0.1 to 3.0 Ohm
• 0.66" OLED Display
• 0.1 Watt adjustable increments, from 5 Watts until 20 Watts. After that is 0.5 Watt increments
• 2 independent fire buttons that are selectable usage, from side-fire to face-fire
• 5 Power Modes:
• Power
• Temperature Control
• Boost
• Heater-Protection
• Bypass
• Reverse-polarity protection
• Individual user preferences selection
• Versatile menu structure

The dicodes BORO is precision machined in Germany and backed by a one year warranty on the electronics*.

dicodes.  There is no substitute, why settle for anything less!

Contents

• dicodes BORO mod
• Short user guide
• Sample pack of dicodes NiFe30 ResisTherm Temperature Control Wire
• Packaged in custom metal box

Charging

While the dicodes BORO mod has a built-in USB-C charging port, users can also opt to manually swap pre-charged batteries as they are spent.

*Warranty Terms
One year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. Warranty will also not cover neglect caused by the user, such as setting the device down on liquid (which may short out the circuit against the charging contacts at the bottom), or liquid leaking out of the user's atomizer which may seep into the body and contact the electronics/plate. Liquid seeping in to dicodes mods have been known to cause a short circuit. Take care to NOT place this mod on to a wet surface, or if you encounter a liquid leak, to ensure the bottom plate is removed to clean up any accumulated liquid from the bottom and ensuring it is dry before re-inserting a battery. Any damages as a result of such neglect can be repaired, however, will be at the user's cost for shipment and repair.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.