Nautipins by Velvet Vape

These high precision Nautipins by Velvet Vape are the simplest and easiest way to customize airflow to the >> Aspire Nautilus Coil << for a true MTL vaping experience.

Designed and implemented by Atmizone for Velvet Vape, these pins act as a replacement for the corresponding bottom part of your compatible coils. Just swap the existing positive contact pin with your desired Nautipin size to get a perfect fixed MTL draw!

The Nautipins do NOT change the coil's outer form and shape, so that their compatibility is ensured 100% for most products that use the Aspire Nautilus or Triton Mini coils.

Features:

• 3 pins with air flow holes of 1.0mm, 1.2mm, and 1.5mm
• Laser engraved "1", "2", and "3" respectively, to mark the size of the air hole
• Gold plated brass core for optimal conductivity and for reminding you these are not disposable, compared to the nickel-plated body of the coils
• Compatible with all products that use the Aspire Nautilus / Triton Mini coils, including >> Velvet Vape's Nautilink <<

Note: The Nautipins are only meant to be used with Aspire Nautilus / Triton Mini BVC 1.6 and 1.8 ohm coils, along with the Aspire Nautilus Mini 0.7 ohm BVC coils.

To get similar functionality for use in other coils, you will need to get the >> Velvet Vape Multipins << for use with the following coils:

• dotAIO coils by dotmod
• Aspire Triton Mini
• Aspire Nautilus 2S 0.7 Ohm Mesh

INSTALLATION NOTE: Pay attention to the thin contact wire that sits between the rubber isolator gasket and the pin, when inserting the Multipin. Ensure this wire is pressed against the wall of the gasket. DO NOT push the wire in to the coil, or it may lead to a short circuit or another anomaly that results in poor performance of the coil.

Velvet Vape Nautipin/Multipin Compatibility Chart: