Boreas 510 Drip Tip Set by Taifun
The Taifun Boreas Drip Tip series of drip tips allows for colour/material co-ordination with the new >> Taifun Box Pro S, M, and L <<.
The design of the Taifun Boreas Drip Tips eliminates the flange at the base of the shank, allowing for an adjustable depth/height of this drip tip series. This allows users to achieve a seamless connection between the drip tip and the chimney of their atomizer. By eliminating or minimizing the gap between the bottom of the drip tip's 510 base and the top of the atomizer's chimney, this will minimize or eliminate condensation or liquid pooling within that gap, and will actively improve the vapour sensation. This will also result in a variability of the visible height of the drip tip above the top of your atomizer.
Attention must be paid to the following: Atomizers that have a top coil/deck, or with dripper style atomizers that do not have a 510 drip tip stop, be aware that the Boreas drip tip can fall through due to its flangeless design. Pay close attention to this, as this drip tip can potentially cause a short circuit or electrocution if the tip tip were to fall deep enough into the deck to make contact with the coil and/or the coil posts. It is therefore NOT recommended to use the Boreas drip tip on the >> Taifun BTD RDA << or >> Taifun GX RDTA << series of atomizers.
The Juma variants (Woodland Green, Gem Black, and Gem Blue) are individually unique pieces and will visibly differ in grain, patterning, and colour shade from each other, and from the photos shown here. This is due to the inherent nature of the deviations in colour structure in Elforyn Juma, and do not constitute a defect. Each of the Juma drip tips are unique.
Care is recommended to be regularly performed on the Juma variants of the "Chopsticks" (the coloured top portion of the assembly), especially when putting them away for storage. To clean them, lukewarm water is sufficient, and then treat the Chopstick with some 100% vegetable glycerin to bring out and maintain a rich and coloured luster to it. NEVER use plastic cleaners or other oils on these plastic components that come into contact with your vapour inhalation path!
Boreas Properties:
- Inner Diameter/Bore: 3.5 mm
- Boreas Visible Height: ~14 mm
NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
