Base for Boreas / Pro 510 Drip Tip by Taifun
This 510 base can be used as either a replacement / spare part, or to build up your own >> Boreas << or >> Boreas Pro << drip tip set. A "chopstick" (the top piece) is required, along with the mid-section (if building a Boreas Pro drip tip). This is NOT a complete drip tip set!
The Taifun Boreas Drip Tip series of drip tips allows for colour/material co-ordination with the new >> Taifun Box Pro S, M, and L <<.
Attention must be paid to the following: Atomizers that have a top coil/deck, or with dripper style atomizers that do not have a 510 drip tip stop, be aware that the Boreas drip tip can fall through due to its flangeless design. Pay close attention to this, as this drip tip can potentially cause a short circuit or electrocution if the tip tip were to fall deep enough into the deck to make contact with the coil and/or the coil posts. It is therefore NOT recommended to use the Boreas drip tip on the >> Taifun BTD RDA << or >> Taifun GX RDTA << series of atomizers.
Boreas 510 Base Material:
- 1.4301 Stainless Steel
NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.