Taifun Box Pro L

Taifun BOX PRO L - The high-end battery carrier for demanding users - Powered by dicodes

The Taifun BOX PRO L is an electronically controlled battery carrier for hobbyists and enthusiasts who demand the highest performance out of their device and atomizer, perfect for rebuilders as well as pre-made factory coil atomizers (up to 25mm in diameter), using a revised dicodes chipset for ideal user-friendliness, and now with a built-in USB-C PD+ charging port!

The body of the Taifun BOX PRO L is available in different materials and colours such as Delrin, PET, and Juma. The surface of the bodies are elaborately processed to create a particularly silky hand feel and a special appearance. A protective glass for the display is now also integrated into the body for a smooth and flush appearance and feel. The corners have all been rounded, and the top and bottom plates have been aligned for an even cleaner look.

The combination of weight, treated surface, and revised shape gives the Taifun BOX PRO L a distinctive feel. Once you hold this in your hands, you will understand.

Inside the Taifun BOX PRO L, a dicodes chipset ensures an excellent vaping experience. One of the only complaints of the dicodes chipsets is its lack of user interface friendliness, but the version found in the Taifun Box has been completely redesigned and refined for maximum user friendliness and efficiency. The menu navigation has been re-programmed and geared towards ease-of-use. Sub-menus have been logically divided and can be called up directly with simple quick access using key combinations. Long setting paths have been shortened and unnecessary settings have been removed or automated directly into the respective operating modes using an implemented configuration assistant. Power and temperature can be adjusted directly at any time using the + and - buttons. The displays on the 0.91" OLED display on the side edge of the device are clearly structured and show all important parameters and settings at a glance. In contrast to many other devices, the Taifun BOX PRO L always shows the actual power output.

The Taifun BOX PRO L is powered by a single 21700 IMR lithium battery, and achieves a maximum output power of up to 80 Watts. It has an internal battery resistance monitor, and warns of battery overload at outputs above 60 Watts.

The Taifun Box Pro L works with 5 different operating modes:

• Power (VW)
• Power Boost*
• TC
• Pulse
• Bypass (switched off power regulation and safety circuits) - recommended only for the most experienced users.

With 2 year manufacturer warranty on the electronics.

Brief overview of device features of the Taifun BOX PRO L:

• Height: 81mm
• Thickness: 41mm
• Width: 25mm
• Power Range: 5 to 80 Watts
• Power Source: 1x high drain 21700 IMR lithium cell. See our selection of 21700 batteries >> HERE <<.
• Minimum Battery Voltage: 2.5V. Power cut-off occurs below this
• Ready to vape immediately after wake from automatic shutdown mode
• No power consumption during automatic shutdown or standby
• Maximum Voltage Output: 11 Volts
• Maximum Output Current: 22 Amps
• Spring-loaded copper-beryllium center pin
• Temperature controlled vaping with all common wire types. Can also program for custom TCR curves
• Resistance Range (at 80W): 0.17 to 1.5 Ohms
• Total Resistance Range: 0.1 to 3.0 Ohms
• Battery internal resistance measurement
• Menu assistant for greater user friendliness and operation
• 5 Operating Modes: Power (VW), Boost*, Temperature Control (TC), Pulse, and Bypass (mechanical)
• Reverse polarity protection
• Spring-loaded battery positive pole with 4 contacts for optical power consumption
• Built-in USB-C charging port with PD+ support
• High-quality housing materials: brushed stainless steel (1.4301), and depending on the body version: Delrin, PET, or Juma

*The Boost function of the Taifun Box Pro M does not have the periodic boost of the dicodes Dani Box sister models, in favor of the setup assistant. 

Notes:

The Juma variants (Woodland Green, Gem Black, and Gem Blue) are each individually unique due to the patterning of the material. Each one will visibly differ in pattern, structure, and grain from the photos shown here. Deviations in the shade of colour are also possible, and do not constitute a defect. Each body is unique.

The dicodes Taifun Box / Pro Adapter Inlay for the dicodes CS1 Charging Station is NOT compatible with these newer USB-C variants of the Taifun Box Pro.

Scope of Delivery:

• 1x Taifun BOX PRO L
• 1x Instructions for use