Taifun Box Pro Blasted

The Taifun Box Pro Blasted from SmokerStore is a revised version of the popular Taifun Box. The main changes are to the external design and shape, now eliminating with the 3 separate plates and this BLASTED variant is delivered with a media blasted stainless steel body to give the user a serious feeling of heft and robustness. The surface of the body was elaborately processed to create a particularly silky hand feeling and a special appearance. A protective glass for the display is now integrated in to the body as well, to prevent damage to the screen laying underneath. All edges are now rounded out, and the top and bottom plates of the box are adapted to the new ergonomic body design. The combination of weight, treated surface, and revised shape gives the Taifun Box Pro an unmistakable feel. You just have to pick one up to truly understand what it is about.

The original >> dicodes Taifun Box Adapter Inlay << for the >> dicodes CS1 Battery Charging Station Base << will also be able to perfectly fit the Taifun Box Pro, so no new adapter inlay is required.

The Taifun Box Pro is an electronically controlled and power regulated battery advanced personal vaporizer device, ideal for any type of atomizer from rebuildables to pre-made coil tanks, and can fit atomizers up to 25mm in diameter. It is powered by a single >>18650 Lithium Battery Cell<<, with a maximum output order of 80 Watts. The dicodes FL80 chip set in the Taifun Box Pro also has internal battery resistance monitoring to warn of battery overload. The 0.91" OLED display on the side shows the most important parameters during and after vaping, and the settings in the menu can be adjusted using the 3 available buttons for navigation. Many resources were spent by SmokerStore to develop a fully customized user interface in co-operation with dicodes to develop a much more user friendly user interface that is as easy as any other chip set on the market, if not easier. 

The Taifun Box Pro has five different operating modes:

• Power (VW - variable wattage)
• Power Boost
• Temperature Control (TC)
• Pulse
• Bypass (power regulation switched off, and direct battery voltage applied to atomizer)

Changing settings is as easy as pressing up/down to change power settings, or a combination of up/down along with the fire button to enter the menu for more in-depth customizations, thanks to the revised firmware for the user interface.

Taifun Box Pro Features:

• Power range: 5 to 80 Watts with a high discharge 18650 lithium battery, with the minimum battery voltage cut off set to 2.5 Volts from the factory
• Near instantaneous wake to vape from standby after automatic shutdown
• No power consumption after automatic/active shutdown
• Maximum output voltage: 11 Volts
• Up to 22 Amp output current
• Spring-loaded center pole made of copper beryllium
• Temperature controlled vaping with all common wire types
• Accepted resistance range (for full 80 Watt output): 0.17 Ohms to 1.5 Ohms
• Total accepted resistance range: 0.1 Ohms to 3.0 Ohms
• Battery internal resistance measurement and monitoring
• Menu assistant for user-friendly operation
• Five operating modes: Power (VW), Boost, Temperature Control (TC), Pulse, and Bypass
• Reverse polarity protection
• Spring-loaded positive battery pole with 4 contacts for optimum power consumption
• Battery charging contact on the underside suitable for use with the dicodes CS1 Battery Charging Station Base when used in combination with the dicodes Taifun Box Adapter Inlay
• High quality materials: stainless steel and POM (Delrin) surface: treated.
• Height: 81.8mm
• Width: 40.5mm
• Thickness: 25.0mm

Scope of Delivery:

• 1x Taifun Box Pro BLASTED
• 1x Instruction Manual

Taifun Box Pro Manual Download:

• Download Taifun Box Instruction Manual (PDF)