SturdyONE by Sturdy Mfg

Boro RBA and dotAIO Compatible RTA

The SturdyONE by Sturdy Mfg is a convertible rebuildable base atomizer that is well built, simple to use, and high performance rebuildable atomizer that can be used in either Boro Tanks, or as a complete dotAIO tank replacement.

Out of the box, it comes fully configured as a dotAIO rebuildable tank, but with the swap of a few parts (included in kit), can be converted for use in a full sized Boro tank to use in Billet Boxes, delro, or any other device compatible with the standard sized Boro Tank.

Spare tanks in original finish or different colours are available >> HERE << SturdyONE Sturdy MFG Replacement Spare Colour Tanks.

Included, are different air flow pins to adjust your draw resistance as desired, along with spare silicone gaskets in both clear (shown installed in photos), or black to change according to your desired setup scheme.

Get the SturdyONE Expanded Air Pin Kit >>HERE<< to add 1.2mm, 1.5mm, and 4.0mm to your range of air flow!

Wire lead trap recess is machined into the deck to aid in building and allow for easier rebuilding.

Domed evaporation chamber cap results in smoother airflow movement for greater flavour yield.

A spare parts kit is also available for separate purchases >>HERE<<.

STURDYONE SPECIFICATIONS:

• Diameter : 20.0mm
• Height : 34.8mm
• Weight : 18.4g
• 4.5mm diameter chimney

• PCTG (Clear) dotAIO sized proprietary tank
• SS316 (Food Grade) chimneys, cap, deck, base, Dot adapter
• SS316 (Food Grade) slotted post screws
• SS304 airflow pins
• PEEK insulators
• Black PEEK & Brass Boro adapter
• Silicone & Nitrile o-rings/Fill plug

• Dual platform friendly (dotAIO & Boro Tank)
• Direct wicking system for constant and fast liquid flow
• Reduced chamber cap with dome system for increased flavor production and airflow smoothing
• Built-in 510 threading for easy coil building
• Reverse threaded chimney to avoid Boro dumps
• Spare kit provided in case you lose something
• Support coils up to a maximum of 3.5mm in diameter
• 1.0mm, 2.0mm, 2.5mm (installed), 3.0mm & 3.5mm airflow pins provided
• Takes 4.15-4.20mls of juice in Dot mode (measured with water because juice has various viscosities)

Simple. Versatile. Firmly Built. SturdyONE.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.