This affects not only the bottles that e-liquid products are sold in, but also the hardware that is refilled with said liquids, including (but not limited to), clearomizers, tanks, rebuildable tank atomizers (RTA), rebuildable dripping atomizers (RDA), and bottom feed (BF) atomizers.

Because the process to get a product tested and certified for sale in Canada is quite expensive, many small batch manufacturers (particularly in the high end vaping market) have no interest in going through the process and expense to get their product certified for the Canadian market, when Canada is the only country in the world that has such requirements. Further, as Canada represents only a very small single-digit percentage in total global sales in the high end vaping scene, it makes very little sense for these boutique manufacturers to go through the CRC process.

As a result, there currently does not exist any rebuildable atomizer options on the market, nor does there appear to be any to serve the enthusiast vaping scene in Canada in the near future. Any such products that you do see on our website, are reserved for international export sale only, and cannot be sold within Canada. Attempts to purchases these items, will result in these items being cancelled from your order, or having your entire order cancelled, if it is determined that your order is destined within Canada.

However, there DOES exist some limited options available, as there is an allowance for replacement parts and replaceable coils. Using this definition, this allow Vapes by Enushi to sell CRC-compliant tanks (which all accept factory-made replaceable coils) along with rebuildable coils that replace the disposable factory coils. So, rather than use the replaceable coils the tank was designed for, some of these products would be able to use an RBA (Rebuildable Base Atomizer) instead, allowing vapers to get rebuildable capabilities to not only save money on the coils, but also reduces landfill clutter while allowing enthusiasts to fine-tune the quality of their vape. At the same time, the containment tank still complies with Canada's CRC regulations.

If you would like to discuss options to find a solution that might work for your needs, do not hesitate to contact us, and we will see if we can guide you towards a product that is suitable for you.

The shipment of Tripod Batch II and accessories has finally arrived!

Please be patient while we complete doing QC checks on everything and as we begin sorting, fulfilling, and creating shipping labels for all the preorders.

We will likely be silent for the next day or so while we get all of this completed. Please be patient and you will receive automated system emails from our website on fulfillment to shipment status. If you are local and chose to pick up your order, you will receive "Ready for Pickup" notices.

We still have a few units of everything left in stock, but you guys have definitely exceeded our expectations. I had ordered plenty of extra of all items, but as we are already working through all numbers, it looks like we are already running low on a number of items.

However, stay tuned - we will very shortly be announcing our partner stores in Canada that we have distributed Tripod product to as well, and they should have a few goodies in stock for everyone!

Thanks again for all of your support and your patience through this preorder!

The Tripod Batch II & Accessory shipment was originally slated to arrive today, but due to a slight delay in Canada Customs releasing the package over the weekend, it will not be arriving today. By the time it was cleared and transferred to the DHL depot, it was too late to get on to a truck for today's deliveries. However, it does look like it will be arriving in our hands tomorrow.

We will be attempting our best to begin getting parcels shipped out tomorrow, but there are NO guarantees that your parcel will physically enter the system for tomorrow's date. It will depend on a number of factors, including what time DHL drops the parcel off, and how busy we are in the store. Our CanadaPost daily delivery pickup occurs at 4pm, so our window to prepare shipments is small. We will do our best to cope.

In most cases, you will be receiving shipping notices by tomorrow night, but most likely your parcel will not get picked up by CanadaPost until Wednesday, which will count as "Day Zero" of your shipping timeline.

The >> Tripod RTA from Atmizoo by Atmizone << has very quickly become one of the hottest high end RTA's of 2019!

See our full line of Tripod RTA items >> HERE <<!

Batch 2 is currently in the works, and should be shipping out to us from Greece on August 6th, 2019. The shipment is expected to land to us some time around Monday, August 12th 2019, assuming no major delays caused by Canada Customs.

Pre-orders will open for Batch 2 Tripod and all of the new accessories, on Wednesday, August 7th at 13:00 (1:00pm EST)! Follow >> This Countdown Timer Link for the Tripod Batch 2 & Accessory Release at Vapes by Enushi! <<

Once the shipment arrives, all preorders will ship out in the order that transactions were received (first come, first served). Please give us a day or two to get through all of the shipments, as we are expecting a very large number of orders!

Introduction to the Tripod RTA from Atmizoo of Atmizone

Hailing from Greece, this incredibly well machined atomizer features threadless accessibility to the deck, and for top filling, making deck access and refilling a very easy endeavor. Fine tolerances allow for perfect sealing to prevent leaking, despite the thread-free design of this rebuildable tank atomizer.

Tripod 3.4mL Extension Tank Kit

The standard tank size is a TPD-compliant 2.0mL capacity. However, the new >> Tripod 3.4 mL Extension Tank Kit << increases the tank capacity with an additional 1.4 mL while increasing the overall height of the Tripod RTA by only 6mm to a total of 45.0mm height.

Air Flow

A simple two-post deck is nestled at the bottom of the tank, with an airflow inlet at the lower side of the base and directed to strike the coil directly from underneath your build. Air flow is adjusted via the air flow control ring at the base of the atomizer, and air exits through a 4.0mm bore diameter air flow tube under the coil. MTL pins are included with the RTA, which insert into the 4.0mm bore diameter air flow tube, further reducing the air outlet to a more focused 1.0mm, 1.2mm, 1.5mm, or 1.8mm air flow for a tighter draw, perfect for lower power setups. 

Fixed Air Flow Tubes Kit

The >> Tripod Fixed Air Flow Tubes Kit << is an add-on accessory that allows users to fix the air exhaust tube to a set size, if they desire a more focused air flow for restricted lung vaping. This is ideal in situations where the standard 4.0mm bore diameter of the stock tube is too large for your setup and a more refined airflow is desired to develop better flavour control.

MTL Drip Tip Long Top

Also new, is a new >> Tripod MTL Drip Tip Long Top <<, a proprietary drip tip interfacing with the already existing two-part threaded design of the stock drip tip. Featuring a slightly longer length for comfort as per traditional MTL drip tips, and a tighter 3mm inner bore diameter for greater focused air flow and flavour delivery to the user.

Reviews of the Tripod from Atmizoo by Atmizone

Check out this great >> Tripod RTA Review by The Vape Review <<!