The Kayfun 5² (K25) RTA by SvoëMesto

The SvoëMesto Kayfun 5² (K25) is everything the Kayfun 5 is, but bigger, combining simplicity, functionality, and outstanding performance.

A fully adjustable liquid control system gives you full control over your liquid flow, however, thanks to SvoëMesto's pressure-based feeding system, fine tuning is not required with the majority of setups. After closing liquid control, the Kayfun 5² can easily be filled through the top within a couple of seconds.

Just as simple as filling it, accessibility to your coil is done by removing the tank, regardless if it is filled or not.

The build deck has been enlarged to fit complex builds like Clapton coils more easily.

At the same time, SvoëMesto has increased the adjustable air flow to a maximum of 4mm, providing even more air flow for high performance builds.

The airflow control can be adjusted externally and has three positions:

• 3.0 mm
• 3.5 mm
• 4.0 mm

The internal design of the evaporation chamber has been optimized to create an outstanding flavour profile that Kayfun fans have grown to love, even at higher airflow settings.

As with previous models, the Kayfun 5² only utilizes the highest grade materials. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required.

Its functionality, intuitive handling and rich flavour profile combined with great performance capabilities makes the Kayfun 5² a true daily driver.

Technical Features

• Anti heat drip tip with POM inlay (engraved)
• Top filling
• Quartz glass
• Liquid control (fully adjustable)
• Enlarged build deck for easier building
• M4 build screws
• PEEK insulator
• Increased maximum liquid flow
• External airflow control
• Increased maximum airflow
• 316L stainless steel
• 510 connector
• Serial number for authentication
• Easy assembly and maintenance

Measurements

• Diameter: 25 mm
• Height: 62.5 mm (without mouth piece)
• Tank Capacity: Glass Tank = 6 mL. Steel Tank = 7.5 mL

Materials

• Stainless steel: WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A)
• Glass tank: Borosilicate Glass
• Insulators: PEEK, POM-C
• O-rings: NBR 70

Scope of delivery:

• 1x Kayfun 5² with engraved steel tank
• 1x Glass tank
• 1x Spare parts kit
• 1x User manual

Additional Information:

The Kayfun 5² was designed for vapers that have either just started rebuilding or are experienced users, looking for an intuitive and reliable experience and a platform to experiment on. Testing has shown that the Kayfun 5² is quite tolerant against user mistakes and not very likely to gurgle, leak, or burn the wick. Especially for beginners, the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Due to its internal construction, an outstanding vape experience can be achieved with very little effort.

Additionally, the 316L stainless steel used is a high quality material that can be found in the dental and medical technology sector. It is a very hard and durable steel which is not easily damaged or scratched.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.