Dani Box 21700 USB-C by dicodes

The Dani Box 21700 USB-C is a slight iteration on the original Dani Box 21700, where the original design was only able to provide in-device charging when used with the dicodes CS1 Charging Station, this new USB-C variant has a built-in USB-C charging port while still maintaining the ability to use the dicodes CS1 Charging Station if so desired for convenience.

The Dani Box 21700 series is an 80 Watt temperature control mod in a compact and ergonomically designed formfactor that fits perfectly in your hand. It can be used with multiple wire types which have a temperature coefficient. The menu offers four different operating modes, allowing the user to switch between variable wattage, variable wattage with heat protection (10 options), variable wattage with power boost (10 options), bypass mode (power limited by output current <20A), or the (very) accurate variable temperature mode (when using a temp-control wire type.)

The body is made from anodized aluminum, available in six different colors with a brushed stainless steel top & bottom cap. It features a top mounted OLED display and a three button operation to easily scroll through the menu with one hand for selecting the desired program. For a mod packed with so many features, it is an easy menu to navigate.

The Dani Box 21700 USB-C is precision machined in Germany and backed by a two year warranty on the electronics*.

dicodes.  There is no substitute, why settle for anything less!

Features

• 80 watts of power
• Power-Boost function up to 100 Watts (depending on condition of battery)
• 0.05 – 5 ohm capable
• 0.66" OLED display
• Powered by a single 21700 or 20700 cell (not included)
• Recommended batteries: >> 21700 batteries << or >> 20700 batteries <<.
• Height: 83mm
• Width: 45mm
• Depth: 25mm
• Weight: 135 grams
• 510 connection point with a 25mm wide landing pad
• Spring-loaded center pin
• USB-C charging as well as CS1 Charging Station contacts
• 510 pin material: CuBe, Copper Beryllium (harder than steel) 
• Top and bottom cap material: brushed stainless steel
• Temperature controlled vaping mode with programs for various wire-types
• Optimized for dicodes resistance wire RESISTHERM (Sample included). Purchase >>HERE<<.
• Reverse battery protection
• Versatile and easy to navigate menu structure
• Individual user preferences selection
• Available colors Black, Titan (dark grey), Blue, Orange, Red, Silver, or Violet
• 2 Year Warranty
• Made in Germany

Contents

• dicodes Dani Box 21700 USB-C
• Short user guide
• Sample pack of dicodes NiFe30 Wire
• Packaged in custom metal box

Dimensions / Weight:

• Height: 83mm
• Width: 45mm
• Depth: 25mm
• Weight: 135 grams (without battery)

Charging

The Dani Box 21700 USB-C now has a built-in charger, while still allowing users to manually swap batteries as they are spent, OR by conveniently charging by placing the device in the CS1 Charging Station by dicodes which comes with the necessary adapter to charge the Dani Box 21700 in the base. The CS1 Charging Station by dicodes is a desktop charger designed specifically for the Dani Box series of mods that can be purchased separately >>HERE<<. This charging station allows users to conveniently drop their Dani Box 21700 USB-C into the charging station for fast, easy, and convenient charging.

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.