delro d650

d650 is delro electronics' first 18650 device. no expense is spared and not a single corner cut, every aspect of this device has been painstakingly designed. All components are bespoke and have undergone a lengthy trial and error process resulting in the most accurate and bulletproof device possible.

Note: These will ship out on Monday, March 6th!

d650 is fully modular, capable of an endless range of customization, and is easy to disassemble, clean, and maintain.

Download the delro d650 user guide/manual >>here<<.

Note: Photos of device shown with drip tip, Boro Tank, RBA, Bridge, or 18650 battery are for demonstration purposes only, and are not included in this sale.

delro d650 Chipset:

Powering the delro d650 is dicodes EC23d chipset. This is the same time-tested and proven board found in their incredibly accurate and well-built >>Dani Extreme V3 tube mods<<. However, the d650's version of this chipset has been highly customized for delro for increased usability. Some of the changes include a faster response time, easier menu navigation and temperature/power adjustment. Further, the menu usability now provides a detailed breakdown of power loss and battery performance to allow users to closely monitor cleanliness/degradation of the grounding circuit - this allows users to determine power efficiency and maintenance scheduling.

All electronic components have been designed in partnership with, and made by >>dicodes GmbH<<, a true expert in electronic design and production. If any issues arise with the electronics, delro has added a ZIF connector (similar to the connection a DNA/BF60 uses to attach the screen to the PCB) to the flexible membrane button board. This means all electronics can be easily removed and replaced as required. All electronics are covered by a 2 year warranty.

Power Handling:

• dicodes ec23d

delro d650 Dimensions:

• 77.5x51x22.5mm (23.5mm to buttons)

Case Material:

• Media blasted Dupont Delrin

Panels:

• Matte acrylic colour-matched to case

Buttons:

• Media-blasted Dupont Delrin

C-Frame:

• Passivated SS316L: Media-blasted stainless steel, or DLC black-plated finish.
• Aluminum: 7075 T7, hard-anodized black and type-2 anodized silver.

T6 Multitool w/ Keychain Holder:

• D2 tool steel
• Finish: Nickel Plated
• Flush Nut Tool, T6 Torx driver, 510 nut assembly tool
• Holder: Media-blasted Delrin with chain loop

Power Connections:

• Gold-plated stainless steel
• Gold-plated 464 Naval brass (battery positive contact)
• Bi-directional spring contact made of gold-plated beryllium-copper (CuBe) (battery negative contact)

Screen Cover:

• Scratch-resistant glass to seal electronics from dust, debris, and fingerprints.

Power Transfer PCB:

• A "power-to-board" PCB delivers stable and consistent current from the battery to the dicodes EC23d via M4 threaded nuts/bolts.

dicodes EC23 Specifications:

• Wattage Output: 5 to 60 Watt
• Power Source: One 18650 battery
• User Interface: 3-button
• Minimum Battery Discharge Level: Adjustable from 2.5 to 3.0 Volts
• Maximum Output Voltage: 12 Volts
• Maximum Output Current: 20 Amps
• Temperature-controlled vaping mode with various wire types
• Mechanical mod (hybrid) mode with electronic overload protection
• 10 Power Boost modes
• 10 Heater Protection modes
• Atomizer Resistance (Load) Range TOTAL: 0.05 to 5.0 Ohms
• Atomizer Resistance (Load) Range at 60 Watt Output: 0.17 to 2.1 Ohms
• Reverse battery polarity protection
• Versatile easy-to-use menu structure
• Individual user preferences selection

delro d650 Package Contents (for this release):

• delro d650, Black or White Delrin - choose when adding to cart
• Black PVD C-Frame (for Black Delrin body), or Matte Nude SS C-Frame (for White Delrin body) - automatically selected when choosing body colour
• Black PVD SS Adapter Connector (pre-installed on Black PVD Frame)
• Nude SS Adapter Connector (pre-installed on Matte SS Frame)
• Gold-Plated Adapter Connector
• Door Panel and Button Panel of matching colour
• Buttons of matching colour
• Tool-steel multitool for Adapter Connector assembly/disassembly, and C-Frame grounding school, magnetically attached to a black or white Delrin keychain holder (colour matched to device body)
• Spare screws and o-rings

A note on the adapter connectors included in this kit: The stainless steel (black and silver) connectors included are known to not fit some adapters and hybrid drip tips - particularly if they are a close match to the Billet Box thread. In such cases, the included gold-plated connector are more likely to have a better fit, and you may use the included multi-tool to swap the connector. However, be aware that there are still some adapters and hybrid drip tips with very accurate Billet Box threads may still have an issue screwing down. Almost all drip tips and adapters we've tested with will screw down without issue, with the exception of a few inconsistent products, which we have yet been able to confirm with any consistency a specific list, with the exception of the Nova x Enushi Flush Nut (neither the delro-specific version nor the BB version) which consistently does not fit in to any of the three included connectors. Further, we have found some adapters/drip tips to fit one connector while it does not fit another of the exact same material.

If you'd like to purchase an adapter or drip tip along with your delro, feel free to ask if it fit in your specific unit and we can check to ensure we get you a unit which fits all your desired adapters/drip tips.