null
Categories

Armor Mods - Engine RDA Rhodium Series, Grey to Blue

Brand :

(No reviews yet) Write a Review
CAD$203.99

Rhodium Series Armor Engine RDA by Armor Mods

The Armor Engine RDA by Armor Mods is their newest bottom-feed capable rebuildable dripping atomizer for 2020, and is Armor Mods first atomizer with dual side airflow on a dedicated single coil build deck.

This Rhodium Series variation features a Cobalt Blue Rhodium plated top cap with a Space Grey Outer Cap in a brushed finish.

NOTE: This product has a territory exclusion zone and cannot be sold to Asia. Any orders for this product intended to arrive in Asia will automatically be cancelled 

NOTE: Photos shown of Armor Engine attached to mod are for demonstration purposes only. Mod is not included in this sale. This sales listing is only for the Armor Engine RDA.

 

Armor Engine RDA by Armor Mods

 

With aesthetics inspired by the combustion engine design, the Armor Engine inherits the outstanding craftsmanship, quality, and innovation of the Armor Mods family, while bringing forward a completely new air flow design system in combination with a grooved air channel design that harks back to the original Armor 1.0 RDA.

 

Armor Engine RDA by Armor Mods

 

Design

The entire assembly now goes together with four main components in combination with a standardized 510 sized drip tip, allowing users to use most standard drip tips from their collection without the need of an adapter. The four main components are comprised of:

  • Build deck
  • Air flow insert
  • Main cap with heat sink / air channel design
  • Top cap or minor air flow adjustment ring

Armor Engine RDA by Armor Mods

 

Air Flow Adjustment

The top cap or minor air flow adjustment ring allows users to rotate it for aesthetic alignment with their mod , or from a functionality standpoint, can be rotated to fully expose the air intake holes OR rotated to cover the holes for a slight restriction in air flow, forcing air to run along the air channel / heatsink grooves before reaching the air intake.

Further airflow adjustment can be made by rotating the Main Cap against the Airflow Insert to reduce the aperture of the air intakes on the Airflow Insert

The original air flow insert included with this RDA provides a direct lung air flow, perfect for most users looking to vape between 25 to 60 Watts.

Optional Air Flow Inserts will be available for purchase >> HERE << to allow users to fine tune airflow a bit more for restricted air flow settings, with the following air intake sizes:

  • Original: 2.4 x 3.3mm - Ideal for 25 to 50 Watts with a slightly restricted direct lung draw
  • Medium: 1.8 x 2.2mm - Ideal for 20 to 35 Watts with a more restricted direct lung draw
  • Small: 1.2 x 1.2mm - Ideal for 15 to 25 Watts as a very restricted DL draw or a loose MTL draw

Downward sloping air intakes minimize opportunity for leaking due to over-squonking.

 

Armor Engine RDA by Armor Mods

 

Airflow Inserts

A unique ball bearing detent system allows the Airflow Inserts to lock securely into place with a satisfying *click*, with an added feature of this insert also acting as the chamber reducer to minimize any dead space for better flavour and vapour compression and production for a warming tasting vape.

 

Airflow Insert for Armor Engine RDA by Armor Mods

     Airflow Insert for Armor Engine RDA by Armor Mods     Airflow Insert for Armor Engine RDA by Armor Mods

Superior Cooling Performance

Mimicking the aesthetics of a combustion engine's piston head, the main cap of this RDA features grooves cut into it, which serves two purposes:

  1. Air channel if covering the face of the air intakes with the air flow control top cap.
  2. Heatsink design to shed heat faster.

By cutting the grooves into the circumference of this cap, this increases surface area for heat to shed away from the cap faster. Despite the full stainless steel construction, user experience has shown that the cap experiences very little heat build up, even when chain vaping at very high wattages.

 

Armor Engine RDA by Armor Mods     Armor Engine RDA by Armor Mods

 

Armor Engine Specifications:

  • Diameter: 22mm
  • Height (excluding drip tip and 510 connector): 16mm
  • Drip tip connection size: 510
  • Included drip tip material: Delrin/Acetal
  • Insulators: PEEK
  • Material: 316 Stainless Steel
  • Bottom feed or standard dripping capable - both pins included
  • Build deck style: Single coil, opposing legs on two opposing posts

Armor Engine Package Contents:

  • Armor Engine RDA
  • Standard 2.4 x 3.3mm Airflow Insert 
  • SS Main Cap
  • SS Top Cap / Minor Airflow Adjustment Ring
  • Black Delrin 510 Drip Tip
  • Bottom Feed Pin (installed)
  • Standard Pin for dripping
  • Spare parts kit
  • Aluminum case that doubles as a build stand with its built-in 510 connector

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.